Most enterprise networks consist of a LAN, WAN and internet edge -- and potentially a data center. These architecture segments include several options to interconnect various network components and transport data to all parts of an enterprise network.
Here's a look at some of the most common types of network connections used in internet edge, LAN and WAN segments.
The internet edge is the demarcation point that separates a private corporate network from the public internet. Connectivity within this portion of an enterprise network is often referred to as internet broadband.
Depending on physical location, available ISP options and business requirements, popular internet edge connectivity options include the following:
Twisted-pair internet connections are often delivered as a standard Cat6 or higher eight-pin twisted-pair cable. Other options include DSL or Integrated Services Digital Network, which use traditional telephone cabling that converts into an RJ-45 port via a DSL or ISDN modem. Throughput rates for twisted-pair connections from ISPs often cap at 1 Gbps.
Cable companies often deliver internet broadband access over coax cables. Like DSL and ISDN, a cable modem converts the coax connection into a RJ-45 port at the customer demarcation point. The Data Over Cable Service Interface Specifications, or DOCSIS, technology behind cable broadband has increased steadily over the years, to the point where speeds can reach as high as 2 Gbps.
Fiber is often used as the transport medium for large businesses that require internet broadband throughputs higher than what twisted-pair or coax cables can deliver. With fiber, internet broadband services can reach 10 Gbps or higher.
Some wireless broadband options are used as primary or secondary backup connections at the internet edge. In most cases, businesses will opt for wired connectivity for internet access because wired is typically more reliable and less susceptible to outages or interference. In certain situations, however, wireless may be the only option for a business.
Point-to-point Wi-Fi, public LTE or 5G, and satellite broadband are common ways to connect a business or remote office to the internet with relative ease. Keep in mind that wireless throughput rates are significantly lower, compared with wired alternatives. Expect throughput rates to be well below 100 Mbps.
Ethernet and wireless connectivity options are the dominant types of network connections for LANs.
From an Ethernet perspective, twisted-pair and fiber optics cables interconnect endpoints and uplinks. Twisted pair, fiber, direct-attached cable and Fibre Channel remain popular options in private data centers. Each connection type varies based on the types of devices connected, the required amount of throughput and the distances the connection needs to travel.
Wi-Fi is one of the most popular options for wireless LAN connectivity, as all modern laptops, smartphones and tablets come fully integrated with Wi-Fi chips and antennas. The latest Wi-Fi 6 standard offers increased speeds and improved efficiency, among other benefits.
Bluetooth Low Energy (BLE) is another form of wireless connectivity gaining traction in the LAN. BLE has several use cases, including propagating message notifications to remote workers and customers, as well as real-time tracking of business-critical mobile equipment that roam around a facility.
Businesses are beginning to show interest in private 5G connectivity. Due to the recent availability of freely accessible spectrum in the Citizens Broadband Radio Service frequency range, businesses can design and deploy their own 5G networks for private use.
Organizations use private 5G in situations where Wi-Fi presents technical shortcomings that private 5G can overcome. Wi-Fi might simply be a best-effort medium, while private 5G can guarantee improved performance and reduced latency.
The WAN portion of the overall corporate infrastructure is where the corporate LAN branches out and interconnects various secondary locations or branch sites to create a single unified network spanning a large geographic area. Depending on the available connectivity options and bandwidth required, WAN connections are either sourced through a network carrier or privately deployed by the network owner.
Some types of network connections for WAN connectivity options leased through a telecommunications carrier include the following:
In these situations, the carrier is responsible for maintaining the upkeep and usability of the connection between two or more locations. Certain carriers may also offer wireless WAN connectivity services by way of point-to-point Wi-Fi, microwave, LTE or 5G, and satellite backhaul.
Internet broadband is also commonly used in conjunction with point-to-point VPN connections to provide a logically created and encrypted tunnel between two or more business locations. Any type of internet broadband can work, as long as it meets the necessary throughput and latency requirements.
Sometimes businesses want to interconnect two or more buildings but don't want to rely on a third party for WAN interconnection services. In these situations, dark fiber, microwave and point-to-point Wi-Fi are options that enable full control and data protection as traffic traverses the WAN.
4 ideas for network cable management best practices
Part of: The different types of networks and connectivity options
Networks differ based on size, connectivity, coverage and design. This guide explores seven common types of networks, including their benefits and use cases.
Network topology is essential to network configuration, as it determines the arrangement of a network and defines how nodes connect. Here are six common types of network topologies.
The four types of wireless networks -- wireless LAN, wireless MAN, wireless PAN and wireless WAN -- differ when it comes to size, range and connectivity requirements.
The goal of every network is to connect devices. The connections that form those links -- such as wired cabling and wireless technologies -- are crucial in network infrastructure.
Use these sample questions from CompTIA's 'Official CompTIA Network+ Self-Paced Study Guide (Exam N10-008)' in preparation for your certification exam.
Adobe expects to bolster its collaboration tools for the hybrid workplace with its $20 billion acquisition of Figma, the maker of...
As most organizations now have hybrid workers, virtual collaboration is a priority. Here's how integrating Microsoft Teams with ...
Zoom has added new Contact Center tools for supervisors and agents, giving management better insight into metrics while offering ...
Apple shifted its attention to premium smartphones in the latest iPhone 14 lineup with features such as Lockdown Mode that IT ...
As mobile devices gain popularity as enterprise devices, mobile apps become a greater target for hackers. Understand the risks ...
While there are many options for mobile applications that can help enterprise organizations accomplish business goals, some ...
Arm's roadmap for Neoverse V2 core is designed to handle 5G, HPC and edge workloads. Nvidia will incorporate the offering in its ...
IBMs new generation of Linux-based mainframes can significantly reduce energy use for companies willing to replace x86 servers ...
Following the lead of competitors including Dell and HPE, IBM has debuted an all-in-one subscription plan for iSeries that ...
MSPs can tap robotic process automation for a multitude of applications, but they must consider the challenges of change ...
Tools such as robotic process automation and cloud-based services help service providers relieve employees of mundane work, but ...
Money keeps pouring into the cloud consulting and professional services market as industry executives cite steady demand for ...
All Rights Reserved, Copyright 2000 - 2022, TechTarget Privacy Policy Cookie Preferences Do Not Sell My Personal Info