Fiber Optic Field Assembly Connector SC/APC Fast Connector
Product Description :
Related Products
Product Description :
Fiber optic fast connector is used for field-installable optical fiber connector, widely used in Fiber To The Home (FTTH) access optical networks, not only for single-mode or multimode fiber, and can also choose to 900um,3 mm and the introduction of cable buffered type. With fast installation time and low insertion loss, the connector system provides a good alternative to fusion splicing.
Installation is as easy as strip, clean, cleave cam and crimp.
1. Low insertion loss
2.Low PDL
1.Fiber to the point (FTTX) 2.Fiber to the home (FTTH)
3.Passive optical networks(PON, GEPON) 4.Local area networks (LAN)
5.Cable television (CATV) 6.Test equipment
Installation is as easy as strip, clean, cleave cam and crimp.
Feature:
1. Low insertion loss
2.Low PDL
3.Good channel-to-channel uniformity
4.Wide Operating Wavelength:From 1260nm to 1650nm
5.Wide Operating Temperature:From -40ºC to 85ºC
6.High Reliability and Stability
5.Wide Operating Temperature:From -40ºC to 85ºC
6.High Reliability and Stability
Applications :
1.Fiber to the point (FTTX) 2.Fiber to the home (FTTH)
3.Passive optical networks(PON, GEPON) 4.Local area networks (LAN)
5.Cable television (CATV) 6.Test equipment
Inspection:
| Item | Parameters | Item | Parameters |
| Mode | Single mode | Cladding Dia | 250 um |
| Cable Scope | 3.0x2.0 Bow type Cable | Fiber Dia | 125 um |
| Operating time | about 15s | Insertion loss | ≤0.25dB |
| Return loss | ≤-40dB | Continuous success rate | >98% |
| Assebly times | >10 times | Bare fiber tightening force | >5N |
| Tensile strength | >50N | Temperature range | -40~+85ºC |
| Online stretching resistance test(30N) | IL≤0.3dB | Mechanical endurance (500 times) | IL≤0.3dB |
| Fall-down test(on cement floor at height 4m/each direction one time/total three times | IL≤0.3dB | Application | FTTH/FTTX/FTTB |
Related Products